Cold Rolled :-

LSPLmanufactures a wide range of low carbon ,mild steel CR products, in thickness ranging from 0.10 mm to 3.50 mm & up to a maximum width of 1020 mm, both in Coil & sheet form.

LSPLis also one of the few Indian manufactures of  ultra thin 0.11,0.14 mm CR Coil extensively used for galvanizing.LSPL CR Coils & sheets are known for their close gauge tolerances, superior finish & perfect flatness, free of stretcher strains. They are offered in Bright and Matt finish, in annealed or full hard temper.Major grades manufactured are O,D,DD & EDD of non-ageing ,critical & super EDD CRCA, Automobile structural grades, TMBP, Galvanizing grades, Porcelain Enameling, Corrosion Resistance grade. The speciality grade like medium and high carbon grade ranging from C30 to C80 is in the normal manufacturing range. Any other special grade can be manufactured on mutually agreed technical conditions.

Cold Rolled Full Hard Sheet Coils/Sheets As per JIS G 3141 SPCC-18 or equivalent Unannealed,Unoiled Suitable For Galvanizing

Thickness
0.11 mm to 0.700mm
Width
Up to 1020 mm
Coil Id
508 - 610 mm
Coil Weight
10 MT max.
Material can be supplied
Coil/Sheet form
Special Tolerance on thickness can be provided
Cold Rolled Closed Annealed Coils/Sheets as per following Specifications
Specification
Grade/Quality
JIS-G-3141-1996 ( Japanese)
SPCC-SD/SB,SPCD-SD/SB
SPCE-SD/SB,SPCEN-SD/SB
CR-1,CR-2,CR-3 & CR-4
DIN 1623-Part 1 (German)
St-12,St-13,St-14
BS 1449,Part 1 (British)
CR-1,CR-2,CR-3 & CR-4
ASTM
A 1008/M 1008-01a,A 366,A 619,A 620,A 629,A 606 & A 609
SAE
1010,1008,1006
IS-513-1994/1997 (Indian)
EDD,DD,D & O
Dimensional Range
Thickness: up to 2.50 mm
Width     :1250 mm max
Coil Id     :508mm +-10 mm
Coil Wt    :10 MT max
Packing   :Sea Worthy Export Packaging
Other Special Grade of Steel Coil/Sheet as per following Specification
 Specification
 Grade/Quality
ASTM A 625 (TMBP Sheets)
TMBP,S-R,T-2,T-3
DIN 1623 Part-3 (for Porcelain & enameling))
EK-2,EK-4
Dimensional range
Thickness:0:180 to 0.70 mm
Width   
:
1250 mm max
Coil Id 
:
508 mm +- 10 mm
Coil Wt 
:
10 MT max.
Packing   
:
Seaworthy Export Packing
EN 10165 (European)
M390-50E,M450-50E,M560-50E,M450-65E,M520-65E,M630-65E
EN 10126-1995 (European)
M 660-50D,M890-50D,M1050-50D,M800-65D,M1000-65D
M1200-65D
Dimensional Range
Thickness:  0.500 to 0.650 mm
Width
:
1250 mm max.
Coil Id
:
508 mm+- 10 mm
Coil WT
:
10 MT max
Packing
:
Sea Worthy Export Packing